-
Levers on the
slide-lok must be in full upright position for rope to slide
freely back & forth
-
Load rope (cordage)
from the side, be sure arms on slide-lok are in upright position
when loading.
-
When clamping arms
down to lock into position push the arms forward and down.
-
Adjusts fenders
easily & quickly
Ties up that Jet
Ski to anchor line with a snap. You can also tie up to any size
piling.
Looks nice and
works good.
The 3/8" slide-lok
has flanges attached to the cams to be sure the 3/8" cordage
(ROPE) does not slide out.
The 3/8" size and 1 / 2" size slide-loks
have a tensile strength of 2400 lbs.
Note: (This
is breaking lb. test Working load of 10%)
Example 2400 lbs. x
10% equals = 240 lbs. Your working load limit would be
approximately 240 lbs.
The 5/8" slide-lok
works for sizes 9/16"-5/8" size (cordage) rope.
Tensile strength @
3,500 lbs. (This is breaking lb. test. Working load ofg 10%.)
Example 3,500 lbs. x 10% equals = 350 lbs. Your working load
limit would beapproxiamately 350 lbs.
